The Razor Sharp Edgemaking System consists of two compressed paper wheels that will fit on any buffer or bench grinder. One wheel is coated with 180 grit Silicon Carbide and is used to develop a burr or wire-edge along the cutting edge. The included Conditioning Wax (a special formula of fats, oils and waxes) is applied to the grit wheel to lubricate and control heat. The second wheel is slotted and, with the help of the included jeweler's rouge, is used to remove burrs and polish the cutting edge. A grit wheel will sharpen a couple hundred knives before it needs recoating. An additional 3oz container of Silicon Carbide is provided with the kit, enough to recoat the grit wheel 15 to 20 times.

Complete instructions are included in each kit.

Wheels are available in 8" or 10" diameters. If you are using a 6" bench grinder, you want the 8" Deluxe kit. The reason for this is that in order to sharpen a knife properly, you must have enough clearance between the face of the wheel and the face of the motor housing to accommodate the handle and your fingers. If you are using an 8" bench grinder, you want the 10" Deluxe kit.

Kit Includes:

1 each - 8" Grit Coated Wheel

1 each - 8" Slotted Wheel

1 each - 2oz. jar of 180 grit Silcon Carbide

1 each - Chrome Polishing Compound "cake"

1 each - Conditioning Wax

You now own the world's best sharpening system - it will put a great edge on almost any tool that can be held up to the wheels!

Please read the instructions and feel free to call Razor Sharp Edgemaking System at 1-866-419-4879 with any questions or concerns that you may have.

For more information - information@sharpeningwheels.com

For answers to technical questions or problems - support@sharpeningwheels.com