|Equi-Pak 210cc |
Item No: 47121
Set Time: 30 sec.
Equi-Pak 210cc is packaged in an industry standard cartridge and holds 30% more material than prior models, giving you more material for your money. Your "Go To" product for comfort, protection and therapeutic support.
For use as Pad/Packing Material
Bonds directly onto the sole and frog, Equi-Pak™ is a liquid urethane that sets in 30 seconds
Can be used with or without a pad
Provides support and protection for thin soled, flat-footed horses, absorbs the shock and concussion
Can be filled to ground level for added support in less than 1 minute
No hand mixing and no waste
Will not breakdown, impervious to debris and moisture
Sole and frog left in great condition
Improves depth of sole
PLEASE NOTE BEFORE APPLYING PRODUCT
Vettec products are best used between 65° and 85° F (18° to 29° C). Temperature will affect the set time.
See Cold & Hot Conditions below.
Areas of wetness or bleeding should not be covered. Once healed, commence using products.
Equi-Pak can be applied with the shoe on or off but will bond to the shoe. A coating of oil or petroleum jelly to the top of shoe will prevent this from occurring. Take care not to get any on the area of the hoof being repaired.
Product may not bond to hooves that have been heavily treated with products containing: oils, grease, pine tar, etc. In these instances, a light denatured alcohol scrub and drying should be performed to ensure adhesion.
The following procedures are best-accomplished wearing latex or rubber gloves.
Do not burn or "Hot Shoe" this product.
Use only Vettec mixing tips.