|Sole-Guard 210cc |
Item No: 47160
Set Time: 30 sec.
Sole-Guard 210cc is packaged in an industry standard cartridge and holds 30% more material than prior models, giving you more material for your money.
For use as pad/packing material
Apply directly to the sole and frog
Fast and convenient
Bonds to the foot for 2 weeks
Provides protection and support
Great for providing support for heavy, late term brood mares
Temporary protection for horses transitioning from shoes to barefoot
Can be used as a thin protective layer on the shod foot
NOTE: Sole-Guard is designed for use without shoes and stays bonded to the feet for 2-3 weeks of light riding (more strenuous riding may shorten this time). This technique is not recommended for use on sore, lame or very thin-soled feet.
PLEASE NOTE BEFORE APPLYING PRODUCT
Vettec products are best used between 65° and 85° F (18° to 29° C). Temperature will affect the set time.
See Cold & Hot Conditions below.
Areas of wetness or bleeding should not be covered. Once healed, commence using products.
Sole-Guard can be applied with the shoe on or off but will bond to the shoe. A coating of oil or petroleum jelly to the top of shoe will prevent this from occurring. Take care not to get any on the area of the hoof being repaired.
Product may not bond to hooves that have been heavily treated with products containing: oils, grease, pine tar, etc. In these stances a light denatured alcohol scrub and drying should be performed to ensure adhesion.
The following procedures are best-accomplished wearing latex or rubber gloves.
Do not burn or "Hot Shoe" this product.
Use only Vettec mixing tips.